Texas Instruments TAS5727 - Manual (Page 9)

www.ti.com Using the EVM Software
I 2 C registers can be written or read using this tool. The I 2 C command file can be sent by selecting the
command file and Execute command.
3.3 Volume Function
The Individual and Master volume can be selected, and the required volume value can be entered in the
Properties window after selecting the function with the mouse (see
Figure 9 ).
Figure 9. Volume Control
3.4 Biquad GUI
Using the left mouse button, select the PEQ block. In the Properties window, change BiQuadSrc to
BIQUAD GUI. Then double-click on the PEQ block as shown in
Figure 10 . The Biquad GUI window will
pop up ( Figure 11 ).
Figure 10. Selecting Biquad GUI
9 SLOU299 – December 2010 TAS5727 25W Digital Input Amplifier — with EQ and 2-Band DRC
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated