Using the wireless utility, Displaying a computer’s screen via the projector, Operations – Toshiba TDP-TW90A User Manual

Page 26

Operations

Using the Wireless Utility

■

Displaying a computer’s screen via the projector

Launch the Wireless Utility
software application.

When the Wireless Utility launches, the Screen
Image transmission mode window appears on
the computer screen.
To switch to the Screen Image transmission
mode window from another mode (File or
Projector Camera), click on the Screen Image
icon

Select Transmission mode.

Click on Update automatically or Update manually. See step

for the meanings of

Update automatically and Update manually.

Click on the Advanced button.

The Screen Image: Advanced Settings dialog
appears. Set the dialog as shown below, as
necessary.

•

Interruption
Check the No Interruptions checkbox to prevent
other computers from interrupting the projector, for
example, during presentation in the Update
automatically mode.

•

Window
Select the Place in Tasktray at the start of
transmission checkbox to iconify the Wireless
Utility and place it in the computer’s tasktray
when transmission initiated.
To display the window, double click on this icon, or
right click and select Open from the popup menu.
Even with the Wireless Utility window minimized,
you can use the pop-up menu to stop or resume
transmission as described in step

and later

•

Mode
Selecting High quality improves the quality of the
projected image, but lowers communication
speed. Selecting High speed has the opposite
effect.

Select the screen image you wish
the projector to display.

Select Desktop

The computer screen image is transmitted as-is.

Select application window

Select a running application (e.g. Microsoft

PowerPoint

), and send that application’s

window only.

The desktop and a list of running applications are displayed.
Select the desired application from this list. (If the desired
application is not on the list, launch it. Note that if too many
applications are running, it will consume the computer’s
resources, which could slow communication speed.)

Select the projector to be
transmitted.

The IDs of projectors accessible for communication
will be listed. (When a projector name is set, that
name appears instead of MAC address.) Select the
checkbox of the projector you wish to transmit to
from this list. Then icon

is displayed on the

projector’s screen for few seconds.
It is possible to select up-to four projectors.

Click on the

button.

When “Update automatically” is selected in step

Screen images are sent consecutively after the

button is clicked.

When “Update manually” is selected in step

A single screen image is sent when the

button is clicked.

To halt transmission from Update automatically, click on the

button.

If the Wireless Utility icon has been placed in the tasktray, double click on the icon to
display the window, then halt transmission, or right click on the icon, and halt transmission.

Notes

• It may not be possible to transmit the images from movie player or other video applications.
• When using “Update automatically”, the transmitted image refresh rate depends on the

performance of the computer you are using and the surrounding radio wave environment.

• The projector screen may have a few differences from the computer screen.
• It is not possible to transmit to a projector that is already receiving from another computer.
• If you selected application window in step

, if that application is not active (in use), the

image may not be correctly displayed by the projector.

• The projector ID is the MAC address of the wireless LAN PC card inserted into the

projector.