Topfield TF5000Fe - Manual (Page 32)

MENU OPERATIONS
32
Motorized DiSEqC1.2 setting. The second is to reset the parameters of Motorized
DiSEqC 1.2.
System Recovery
All the data and system setting can be stored and restored.
Recover
It recovers all the stored data and system setting. The factory default setting will be
reloaded unless the installer stores the data and system setting by Store function.
Store
It stores all the data and system setting as current setting. The stored data and seting
will be restored by Recover function.
It is permitted only to the installers. The PIN code is different from that of users.
Transfer Program to Other IRD
It is used to transfer STB firmware to other STB for upgrading the STB.
Notes: Please proceed this menu with connecting the STB of same model and
same specification.
Transfer Data to Other IRD
It is used to transfer STB Data such as service information to other STB for upgrading
the STB.
Notes: Please proceed this menu with connecting the STB of same model and
same specification.