Technicolor - Thomson SpeedTouch 510 User Manual
Page 40
3EC 37891 AAAA TCZZA Ed. 01
3 SpeedTouch™ System Software Upgrade
36
5
The Setup wizard should find your SpeedTouch™ device on the local network.
This is indicated by the following window:
In case more than one SpeedTouch™ device is found, a listing is provided from
which you can select your SpeedTouch™ from.
Note: If the Setup wizard does not find any SpeedTouch™ on the network an
error window pops up. In this case check:
•
That the computer is not connected to the SpeedTouch™ via its USB
interface
•
Whether your computer is correctly connected to the SpeedTouch™
via its Ethernet port.
•
That no dedicated firewall device or router is placed between your PC
and the SpeedTouch™ and that no personal firewall software is running
on your PC.
•
Whether the SpeedTouch™ is turned on and fully initialized.
To repeat the search for the SpeedTouch™, click Back and proceed with step
“4 ”
of this procedure.
6
Once the SpeedTouch™ Setup wizard has detected your SpeedTouch™
device you can proceed with the upgrade procedure.
If more than one SpeedTouch™ device is listed, select the appropriate one.
Then, click Next to proceed.
Step
Action