Technicolor - Thomson SpeedTouch 510 - Manual (Page 21)

1 SpeedTouch™ Installation
3EC 37891 AAAA TCZZA Ed. 01 17
The configuration
procedure
Step Action
1 Once the SpeedTouch™ Setup wizard has detected your SpeedTouch™
device you can proceed with the configuration procedure.
If more than one SpeedTouch™ device is listed, select the appropriate one.
Then, click Next to proceed.
Note: If the SpeedTouch™ has been configured before, it may be protected by
a system password. You must provide this password before you can view the
device details or continue with the configuration.
2 The following window invites you to select the appropriate connection profile
for your Internet connectivity:
Select the connection profile and click Next to continue.
Note: If the Service Provider has included a separate disk with a dedicated
connection profile, click Have Disk to navigate to the location of the appro-
priate connection profile file.
3 Subsequent screens will guide you through the configuration setup of both
your SpeedTouch™ and/or your PC. Follow the instructions and enter the
required information where needed. This information should be provided by
your Service Provider.
4 In a final step all configurations will be applied to the SpeedTouch™ and your
PC. You can follow the configuration progress in following window: