Tally Genicom MATRIX PRINTER 2250 - Manual (Page 114)

➲
Frame Error Transmission error (serial interface)
Compare the format setting of your printer with the setting of your com-
puter.
Check the permissible cable length.
See parity error.
➲
Hardware Alarm Try switching off and on. Check if changes to options have been
previously carried out. Note down the display message. Contact your
dealer.
➲
Overrun Error Received data which has not yet been printed is overwritten with new
data.
Check that the correct busy protocol (e.g. XON XOFF) is set in the menu
Serial interface, protocol.
Check the interface cable (see section Connecting the printer to the com-
puter and in chapter Interfaces ).
BACK QUIT
?
PRINT
Reference manual Troubleshooting
104