Tally Genicom MATRIX PRINTER 2250 - Manual (Page 104)

DOWNLOAD OK is displayed briefly when the procedure has been com-
pleted successfully. The printer then runs through its initialisation routine,
after which it is ready for use.
It is possible to repeat the download separately, e.g. firmware followed
by character generator.
BACK QUIT
?
PRINT
Reference manual Loading firmware
94
➤ Troubleshooting It is necessary to repeat the entire procedure if an error occurs during
the download. This is indicated by a corresponding message on the dis-
play. It may be that not all fault messages can be shown on the display.
In this case, the operating system of your PC displays an error message
such as “Write error on device
…
”.