Tascam FW-1082 - Manual (Page 32)

7 – Specifications
32
TASCAM FW-1082 Owner’s Manual
Digital I/O
Misc. I/O
Overall System Specifications
Digital input (COAXIAL)
2-channel serial digital audio signal input terminal. In the case of Hi sampling, Hi-speed mode is supported.
Connector
RCA jack x 1
Input impedance 75
Ω
Format IEC60958
Audio bit length 24-bit
Digital output (Coaxial)
2ch serial digital audio signal output terminal. In the case of Hi sampling, Hi-speed mode is supported.
Connector
RCA jack x 1
Output impedance 75
Ω
Format IEC60958
Audio bit length 24-bit
MIDI input 1-2
MIDI input terminal
Connector
5-pin DIN connector – conforms to MIDI specifications x 2
FireWire‘ (IEEE.1394 digital interface)
Connector IEEE.1394 connector x 2
Format IEEE.1394
Transmit rate 400 Mbps
FOOT SW (foot switch)
Punch In/Out of DAW application
Connector:
Normally-open 1/4" TRS jack
Sampling frequency
Internal clock 44.1kHz / 48.0kHz / 88.2kHz / 96.0kHz
External clock Digital input