Tascam FW-1082 - Manual (Page 31)

TASCAM FW-1082 Owner’s Manual
31
7 – Specifications
Analog I/O
MIC input 1-4 (Balanced)
Connector: 3-pin XLR jack x 4 (1: GND, 2: Hot, 3: Cold)
Input impedance 2.2k
Ω
Adjustable Input range –56dBu (TRIM max) to –2 dBu (TRIM min)
Maximum gain +54 dB
Phantom power Switchable +48V
LINE input 1-8 (Balanced)
Connector 1/4 inch TRS jack x 8
Input impedance 10k
Ω at LINE/MIC
500 k
Ω at GUITAR (LINE Input: 8 switchable)
Adjustable input range (channels 1–4) –42 dBu (TRIM max) to +12 dBu (TRIM min.)
Adjustable input range (channels 5–8) –43 dBu (TRIM max) to +4 dBu (TRIM min.)
Maximum gain +54 dB (channels 1–4), +46 dB (channels 5–8)
INSERT 1-2 (Unbalanced)
Connector 1/4 inch TRS jack with tip SW x 2(T=SEND, R=RETURN, S=GND)
Send
Impedance 100
Ω
Normal level -2 dBu
Maximum level +14 dBu
Return
Impedance 10k
Ω
Normal level -2 dBu
Maximum level +14 dBu
Analog MONITOR (BAL) output
Connector 1/4" balanced jack x 2
Output impedance 100
Ω
Nominal output level +4 dBu
Maximum output level +20 dBu
Phones output (Stereo)
Connector 1/4 " stereo jack (T = L, R = R, S = GND) x 1
Max output power 52 mW + 52 mW (32
Ω)