Teac SR-L280i - Manual (Page 32)

32
Timer 1
< The unit can be set two different timer setting
separately.
< Adjust the clock before setting the timer (see page 15).
Setting the timer (ALARM 1)
1 Press and hold the ALARM 1 button for more than
2 seconds to display “ON TIME”.
The clock and the Timer indicator ( ) blinks on the
display.
< If no button is pressed for about 10 seconds, the timer
setting mode will be cancelled.
2 Press the TIME button (
. or /) to set the
hour, and then press the ALARM 1 button.
3 Press the TIME button (
. or /) to set the
minute, and then press the ALARM 1 button.
Now the on time is set.
“OFF TIME” is displayed and off time hour value blinks.
4 Press the TIME button (
. or /) to set the
hour, and then press the ALARM 1 button.
5 Press the TIME button (
. or /) to set the
minute, and then press the ALARM 1 button.
Now the off time is set.
The source blinks.
6 Select a source (CD, TUNER, USB, iPod or BUZZER)
using the TIME button (
. or /), and then
press the ALARM 1 button.
7 S e t t h e v o l u m e u s i n g t h e T I M E b u t t o n
(
. or /), and then press the ALARM 1
button.
The volume for timer operation is adjustable from 5 to
max.
Setting the timer is now completed.
You can set the ALARM 2 timer by following the
similar procedure as mentioned above.
ALARM 1, ALARM 2 /