Listening to the radio, If the reception is poor, Fm mode button – Teac SR-L280i User Manual

Page 28

Select “TUNER” using the FUNCTION button.

Select FM or AM using the FM/AM button.

Select the station you want to listen to (auto

selection).

Hold down the TUNING button (

. or /) for more

than 2 seconds and release it when the frequency
display begins to change.
When a station is tuned in, the tuning process will stop
automatically.

< To stop the auto selection, press the TUNING button.

S e l e c t i n g s t a t i o n s w h i c h c a n n o t b e t u n e d
automatically (manual selection)

When the TUNING button (

. or /) is pressed

momentarily the frequency changes by a fixed step.
Press the TUNING button repeatedly until the station
you want to listen to is found.

Listening to the Radio

If the reception is poor

For the best reception, rotate the FM or the AM antenna
until you get stations clearly.

FM MODE button

Pressing this button alternates between Stereo mode
and Mono mode.

Stereo

FM stereo broadcasts are received in stereo and the
“STEREO” indicator lights in the display.

< If the sound is distorted and the “STEREO” indicator

flashes, the signal is not strong enough for good
stereo reception. In this case, change to MONO mode.

Mono

To compensate for weak FM stereo reception, select
this mode. Reception will now be forced monaural,
reducing unwanted noise.