Quick Eagle Networks DL3800E - Manual (Page 96)

5-8 DL3800E Inverse Multiplexer User’s Guide — July 9, 2001
5
Node (Common Equipment) Status
This display shows the status of the unit. NODE STATUS is accessed from
the DISPLAY MENU by pressing Enter when
NODE STATUS appears in the
display.
If one of more errors are detected, one or more of the following messages
will appear. Use the UP and DOWN ARROW buttons to view the
following messages, see
Table 5-1 on page 5-9 for a list of those Common
Equipment Alarm and Status items that could appear in this menu.
NOTE: Only those E1 circuits physically installed (from two to eight)
will have status lines in this menu.
RETURN TO MAIN MENU
DISPLAY ITEM
NODE STATUS
DTE STATUS
NET 1 STATUS
ENTER
EXIT
EXIT
EXIT
EXIT
Use Arrow
keys to view
statistics.
EXIT
ENTER
EXIT
EXIT
Use Arrow
keys to view
statistics.
EXIT
ENTER
Use Arrow
keys to view
status.
DISPLAY MENU
NET 2 STATUS
NET 1.STATISTICS
NET 2.STATISTICS
ENTER
Use Arrow
keys to view
status.
EXIT
ENTER
Use Arrow
keys to view
status.
EXIT
ENTER
Use Arrow
keys to view
status.
EXIT