Quick Eagle Networks DL3800E - Manual (Page 126)

6-8 DL3800E Inverse Multiplex User’s Guide — July 9, 2001
6
You cannot access the
DL3800E unit from a
terminal. The terminal must be running a VT100 or compatible terminal emulation
program.
Make sure you are using a straight through cable with pin 8 CTS cut at the
terminal end.
Make sure the Comm Port parameters match the terminal’s, and the
DL3800E unit has a unique ID. If the DL3800E unit is in a daisy-chain, you
can display a roll call of all unit numbers by pressing Ctrol-x five times.
Table 6-1 Troubleshooting (5 of 5)
Problem Solution