6 windows nt – Quatech DSP-100 User Manual

Page 38

Text mode
Original mode

6 Windows NT

6.1 Installing DSP-100 Under Windows NT

To allow easy configuration of the DSP-100 the Quatech Device Manager for Windows
NT has been written for the hardware. This configuration utility supports the DSP-100
only in block addressing mode.

To begin the installation, open Windows Explorer and search for the ‘Setup.exe’
command to install the Quatech Device Manager. figure.> (D:\Serial Port Adapters\Drivers\Windows NT 4.0 for PCI, PCMCIA,ISA).
Once the installation is complete an icon will be placed on the desktop.

Windows NT Explorer

DSP-100 User's Manual