Quatech DSP-100 - Manual (Page 33)

5. Windows 2000 Installation
To allow easy configuration of the DSP-100, an Windows 2000 "INF" configuration file
has been written for the hardware. This configuration file supports the DSP-100 in both
addressing modes: block mode and “com” mode.
5.1 Installing a DSP-100 Under Windows 2000.
1. Insert the DSP-100 into any available PC Card socket.
2. The first time a new PC Card type is installed the New Hardware Found
window opens. After this first installation Windows 2000 will automatically
detect and configure the card. If the New Hardware Found window does
not open, then skip to the next section, “DSP-100 Resource Settings".
3. The New Hardware Found window provides several options to configure
the DSP-100 card. Click the "Driver from Disk" option button. Click "OK"
to continue.
4. An "Install from Disk" dialog box should appear. Insert the Quatech COM
CD with the "DSP-100.INF" file, select the correct drive letter and path, and
click "OK". Windows 2000 will browse the path for the aforementioned files.
The DSP-100 PC Card should now be configured. In the future, Windows 2000 will
automatically recognize and configure the DSP-100.
DSP-100 User's Manual 27