Quatech DSP-100 - Manual (Page 32)

8. To modify the Interrupt Request setting click the resource name and click
the Change Setting button. An Edit Resource window will open up. Inside
this window click on the up/down arrows to the right of the Interrupt
Request value. This scrolls you through all of the allowable resources for
your hardware. Pay attention to the conflict information at the bottom of the
window. Do not select a value that causes a conflict with any other installed
hardware.
9. If any changes have been made to the DSP-100’s configuration the card will
automatically be reconfigured to the new resources specified. Any time a
PCMCIA card of this type is inserted Windows 98/ME will attempt to
configure the card at these resource settings. Click the Use Automatic
Settings box to reset this card type for automatic configuration.
DSP-100 User's Manual 26