C. clear space, E. fixed glass assembly, D. decorative doors and fronts – Quadra-Fire QFP38-NG User Manual
Page 10: G. remote controls, F. before lighting fireplace
Quadra-Fire • QFP38 Series • 4061-300 Rev i • 9/09
10
Clear Space
3 ft (0.91 m)
in front of
appliance
C. Clear Space
WARNING! DO NOT place combustible objects in front of
the fi replace or block louvers. High temperatures may start
a fi re. See Figure 2.3.
Avoid placing candles and other heat-sensitive objects on
mantel or hearth. Heat may damage these objects.
Figure 2.3
Clear Space
E. Fixed Glass Assembly
See Section 15.K.
D. Decorative Doors and Fronts
WARNING! Risk of Fire!
Install ONLY doors or fronts
approved by Hearth & Home Technologies. Unapproved
doors or fronts may cause fi replace to overheat.
This fi replace requires the installation of a decorative front
with an integral barrier to prevent direct contact with the
fi xed glass panel. DO NOT operate the fi replace with the
barrier removed.
Contact your dealer or Hearth & Home Technologies if the
barrier is not present or help is needed to properly install
one.
For more information refer to the instructions supplied
with your decorative door or front.
G. Remote Controls
For safety:
• Install a switch lock or a wall/remote control with child
protection lockout feature.
• Keep remote controls out of reach of children.
See your dealer if you have questions.
F. Before Lighting Fireplace
Before operating this fi replace for the fi rst time, have a
qualifi ed service technician:
• Verify all shipping materials have been removed from
inside and/or underneath the fi rebox.
•
Review proper placement of logs, rockwool and/or other
decorative materials.
• Check the wiring.
• Check the air shutter adjustment.
• Ensure that there are no gas leaks.
•
Ensure that the glass is sealed and in the proper position
and that the integral barrier is in place.
WARNING! Risk of Fire or Asphyxiation! DO NOT oper-
ate fi replace with fi xed glass assembly removed.