beautypg.com

Quadra-Fire CASTINS-CSB User Manual

Castile pellet insert, Owner’s manual, Models

background image

R

www.quadrafi re.com

250-7251G

August 20, 2009

CASTILE PELLET INSERT

O-T L

Tested and

Listed by

Portland

Oregon USA

OMNI-Test Laboratories, Inc.

C

US

Owner’s Manual

Installation and Operation

810-02901

(MBK)

810-03201

(PMH)

CASTINS-CSB

CASTINS-CWL

Models:

WARNING

Please read this entire manual
before installation and use of this
pellet fuel-burning room heater.
Failure to follow these instructions
could result in property damage,
bodily injury or even death.

Do not store or use gasoline or other fl am-
mable vapors and liquids in the vicinity of this
or any other appliance.

• Do not overfi re - If any external part starts to

glow, you are overfi ring. Reduce feed rate.
Overfi ring will void your warranty.

• Comply with all minimum clearances to com-

bustibles as specifi ed. Failure to comply may
cause house fi re.

Check building codes prior to installation.
• Installation MUST comply with local, regional, state

and national codes and regulations.

• Consult local building, fi re offi cials or authorities having

jurisdiction about restrictions, installation inspection,
and permits.

CAUTION

Tested and approved for wood pellets and shelled
fi eld corn fuel only. Burning of any other type of fuel
voids your warranty.

CAUTION

• Important operating and

maintenance instruc-
tions included.

Leave this manual
with party respon-
sible for use and
operation.

Read, understand and
follow these instruc-
tions for safe installa-
tion and operation.

DO NOT DISCARD THIS MANUAL

CAUTION

DO NO

T

DISCARD

WARNING

Hot glass will cause burns.
• Do not touch glass until it is cooled
• NEVER allow children to touch glass
• Keep children away
• CAREFULLY SUPERVISE children in same room as

fi replace.

• Alert children and adults to hazards of high

temperatures.

High temperatures may ignite clothing or other
fl ammable materials.
• Keep clothing, furniture, draperies and other fl ammable

materials away.

HOT SURFACES!

Glass and other surfaces are
hot during operation AND
cool down.

This manual is related to the following products: