Check the operation of the loaded camera, E-19 – Olympus PT 033 User Manual

Page 20

E-19

After sealing the Case, make sure the camera is functioning properly.
1. Press the POWER button on the Case and confirm that the camera

turns ON/OFF.

2. Press the

/ /SCN button on the Case and confirm that the

camera modes switch properly.

3. Press the shutter lever on the Case and confirm that the camera

shutter releases.

ț Check the other control buttons on the Case to confirm that the

camera functions properly as intended.

Check the operation of the loaded camera.

: • If the camera does not function properly, restart the digital

camera installation procedure from “Check the digital
camera.” on page E-14 of this manual.

CAUTION