Onkyo TX-L5 - Manual (Page 33)

33
SN 29343138 TX-L5.E
Adjusting Each Speaker's Relative Volume Balance Temporarily
(Checking each speaker’s relative
volume balance)
While playing the source, press CH
SEL repeatedly.
Each press of the button changes the
speaker which outputs the sound and the
selected speaker appears in the display in
the following order:
LEFT (Front left ch.)
↓
CENTER (Center ch.)
↓
RIGHT (Front right ch.)
↓
SURR RIGHT (Surround right ch.)
↓
SURR LEFT (Surround left ch.)
↓
SUBWOOFER (Subwoofer)
↓
Speaker volume adjustment mode off
Note
Any speaker that is not included in the speaker
configuration on page 20 is not selected even if
it is actually connected.
(Adjusting each speaker’s relative
volume balance)
Press CH SEL repeatedly to select
the speaker, then press
5/∞ to
adjust the volume level.
The volume level can be adjusted between
–12dB and +12dB.
Repeat this step to change another
speaker’s volume balance.
1 2
■ Saving the adjusted values
Press TEST TONE.
DISPLAY VIDEO 2 VIDEO 1 DVD/CD
DIMMER
HD TUNER MD/TAPE
DVD MD
STANDBY ON
MENU TOP MENU
SETUP
SURR MODE
TEST TONE
DISTANCE LATE NIGHT A.CTRL MUTING
VOLUME
CH SEL
STEREO SP SETUP SW MODE
RETURN
REMOTE CONTROLLER RC- 453S
PR ESET
PLAY
SLEEP
INPUT SELECTOR
DVD MD
Control
ENTER
TEST TONE
2
1, 2
CH SEL
CH SEL
«
TEST TONE
You can readjust each speaker's relative volume balance
according to your preference while listening to the sound.
The adjusted values will return to the values set on page 22
when the AV Receiver enters standby mode, or the main
power is switched off unless you save the values.
Note
You cannot adjust the volume balance while the muting
function is activated.