Onkyo TX-L5 - Manual (Page 19)

19 19
SN 29343138 TX-L5.E
Connecting the Power/
Turning on the AV Receiver
Before connecting
• Make sure that all the connections from pages 10 to 16 are complete.
• Turning on the AV Receiver may cause a momentary power surge, which might interfere with other electrical equipment such as computers. If
this happens, use a wall outlet on a different circuit.
3
STANDBY/ON
ON
STANDBY
STANDBY/ON
ON
STANDBY
SUBWOOFER MODE SURROUND STEREO
ON
STANDBY
POWER
STANDBY / ON
ON OFF
PHONES ACOUSTIC
CONTROL TUNING/PRESET
DVD / C D VIDEO 1 VIDEO 2 H D MD / TAPE
FM AM
INPUT
VOLUME
AV RECEIVER TX-L 5
MEMORY FM MODE
1 3 2
DISPLAY VIDEO 2 VIDEO 1 DVD/CD
DIMMER
HD TUNER MD/TAPE
DVD MD
STANDBY ON
MENU TOP MENU
SETUP
SURR MODE
TEST TONE
DISTANCE LATE NIGHT A.CTRL MUTING
VOLUME
CH SEL
STEREO SP SETUP SW MODE
RETURN
REMOTE CONTROLLER RC- 453S
PR ESET
PLAY
SLEEP
INPUT SELECTOR
DVD MD
Control
ENTER
3
Connect the power cord (mains lead) to a wall
outlet (the mains).
2
1
Press POWER switch to switch on the main
power.
The TX-L5 enters standby mode.
The STANDBY indicator lights up.
Notes
• The TX-L5 is shipped with the main
power ( POWER) switch in the on
position ( _) ON.
• To switch off the main power, press the POWER
switch again.
• The buttons on the remote controller don’t operate if
the POWER switch is set to OFF.
Press STANDBY/ON on the AV Receiver or
ON on the remote controller.
The AV Receiver turns on.
The ON indicator and display on the
AV Receiver’s front panel light. At the
same time, the STANDBY indicator
goes off.
Notes
• When the Onkyo DVD player, CD player, MD
recorder and cassette tape deck are z-connected,
pressing ON button on the remote controller turns in
the z-connected components.
• To turn off the AV Receiver, press STANDBY/ON
on the AV Receiver, or STANDBY on the remote
controller. The AV Receiver enters standby mode. Be
sure to set the volume to minimum before turning off
the AV receiver.
The shape may differ
depending on the region.