Oreck STEAM-ALL STEAM200 - Manual (Page 9)

9
! WARNING!
Assembly
Tip!
To reduce the risk of personal injury,
unplug the power cord from the electrical
outlet and let the unit/accessories cool
down completely before handling.
Attach the Hose/Handle
1. Pull the hose inlet flap down.
. Line up the keyway on the hose/handle with the socket of
the Steam-All™ Steamer.
3. Push the keyway into the socket.
See page 12
to determine the
correct attachments
for your cleaning
job.
Plug
Keyway on
hose/handle
Hose inlet flap
Attach the Floor Nozzle
1. Position the floor nozzle adaptor so the tube portion is
pointing down.
. Insert floor nozzle adaptor into the floor nozzle and rotate
the adaptor so the tube is now pointing up.
3. Pull on the floor nozzle adaptor to make sure it is locked.
4. Place the floor nozzle assembly on the hose/handle, or
extension tube until they are locked together.
You will hear a click and the yellow interlock
should be in the hole on the attachment.
Extension
tube
Floor nozzle
adaptor tube
Floor nozzle
Floor nozzle assembly