Oreck STEAM-ALL STEAM200 - Manual (Page 13)

13
Before You Begin Cleaning
! WARNING!
To reduce the risk of personal injury, unplug the
power cord from the electrical outlet and let the unit/
accessories cool down completely before handling.
Steam may cause serious injury if in contact with
body parts. Always allow the steamer to cool down
before handling.
Do not fill the water tank with any thing other than
water or Oreck Fresh Air
® Steam Mop Essence.
Never put additives (such as perfume, stain remover,
or products containing alcohol) in the water as they
may damage the steam cleaner or make it dangerous
to use.
Fill the Boiler Tank
1. Unplug the power cord and
remove the filler cap by
pressing down and turning
it counter-clockwise.
. Using the measuring cup
and funnel, fill the boiler
tank. The boiler tank can
hold twenty-five fl. oz.
(739 ml). Do not overfill.
3. Replace the filler cap on
the boiler tank.
Cleaning Tips
Using warm water
will reduce heat-up
time and risk of
spitting out water
during start-up.
Important! The filler cap is
a safety feature and must be
properly seated and closed
before generating steam.
Filler cap
Boiler tank spout