beautypg.com

Warning – Oreck STEAM-ALL STEAM200 User Manual

Page 15

background image

15

!

WARNING!

Steam may cause serious injury if in contact with

body parts. Ensure the filler cap is seated properly

and tight, and the safety lock button on the hose

handle is engaged before turning the steamer ON.
Always direct the trigger away from the user and
away from any bystanders.

Turn the Steamer ON

Important! The red indicator on the filler cap is a safety device.

It will push out when there is steam pressure in the boiler

and go back in when it is safe to refill the boiler tank. Do not

attempt to remove the cap when the indicator is pushed out.

Turning the unit off and depressing the trigger will assist in
reducing pressure in the system.

1. Insert the power plug into a polar-

ized electrical outlet.

. Check the filler cap is seated

properly and tight.

3. Engage the trigger lock by pushing

the safety lock button on the

left

side of the hose handle.

4. Press down on the ON/OFF button.

The power and thermostat indicator
will illuminate.

Important! Turning the unit off and

depressing the trigger will assist in
reducing pressure in the system.

It takes approximately five minutes

to reach the correct temperature.
The thermostat indicator light turns
off when the correct temperature
has been reached.

Tip!

Filling the unit

with hot water will

reduce the preheat

time.

Left safety

lock button

ON/OFF button

Power light

Thermostat

indicator light

Filler cap

Red indicator