Oreck STEAM-ALL STEAM200 - Manual (Page 14)

14
! WARNING!
To reduce the risk of personal injury, unplug the
power cord from the electrical outlet and let the
unit/accessories cool down completely
before handling.
Steam may cause serious injury if in contact with
body parts. Always release all steam pressure
before removing the filler cap.
Refilling the Boiler Tank
1. Press the steam trigger and
release all the steam pressure.
. Allow the steamer and assembly
to cool down.
3. Refill the boiler tank (see Filling
the Boiler Tank on page 13).
Important! If the boiler tank is dry,
turn the steamer OFF and allow it to
cool down until the red indicator on
the filler cap has gone back in. It is
now safe to refill the boiler tank. Do
not attempt to remove the cap when
the indicator is pushed out.
Connect the Hose/Handle and Attachments
1. Choose the adaptor, nozzle and accessory needed for your
cleaning job.
. Follow the assembly steps as described on page 9 to
assemble the Steamer in the configuration that you need.
Safety lock
Steam trigger