Oreck STEAM-ALL STEAM200 - Manual (Page 17)

17
! WARNING!
Cleaning Glass Surfaces
Sudden application of excessive heat may shatter glass and
cause serious injury. Always warm glass surfaces gradually
when applying steam to the glass.
1. Warm the glass by applying the steam evenly to the glass
from a distance of eight to ten inches.
. Apply steam to clean the glass at a distance of four to six
inches.
3. Switch the steam OFF and wipe the moisture off the glass
(top to bottom) with the window squeegee.
4. Wipe the squeegee and lower edge of the glass. Dry after
each pass.
Bedding and Upholstery
1. Attach the upholstery nozzle.
. Pass the steam slowly and evenly over the surfaces ensuring
all areas are cleaned.
3. Repeat the process in a cross pattern.
4. Allow the mattress or furniture to dry before covering with
bedding or covers.
To clean very dirty areas move the nozzle slowly across
the surface.
Turn the cloth and change regularly to optimize cleaning
power of the cloth.
•
•
Cleaning
TIPS