Olympus 370 series - Manual (Page 22)

To print from a PictBridge camera
1 Turn on the PictBridge digital camera and select the photos you want to print.
2 Make sure the camera is in PictBridge mode, then connect it to the camera port
on the front of the printer using the USB cable that came with the camera.
Once the printer recognizes the PictBridge camera, the selected photos print.
To print from an HP direct-printing camera
1 Turn on the HP direct-printing digital camera and select the photos you want to
print.
2 Connect the camera to the camera port on the front of the printer using the USB
cable that came with the camera.
3 Follow the instructions on the camera screen.
Enhancing photos
The printer provides a variety of tools and effects that let you enhance your photos or
use them in creative ways. The settings do not change your original photo. They only
affect printing.
Add a color effect
1 Navigate to the photo you want to change, then press OK to select it.
2 Press Menu .
3 Select Edit , then press OK .
4 Select Add Color Effect , then press OK .
5 Use the Select Photos arrows to highlight the color effect you want to use, then
press OK .
The photo appears on the printer screen with the selected color effect applied.
The effect does not change your original photo. It only affects printing.
Add a decorative frame
1 Navigate to the photo you want to change, then press OK to select it.
2 Press Menu .
3 Select Edit , then press OK .
4 Select Add Frame , then select OK .
5 Use the Select Photos arrows to highlight the frame pattern you want to use,
then press OK .
6 Use the Select Photos arrows to highlight the frame color you want to use, then
press OK .
The photo appears on the printer screen with the frame. The effect does not
change your original photo. It only affects printing.
Remove red eye
1 Press Menu .
2 Select Edit , then press OK .
3 Select Red-eye , then press OK .
This setting removes red eye from all prints.
Chapter 2
20 HP Photosmart 370 series