Olympus 370 series - Manual (Page 16)

Insert or replace the print cartridge
Remove the pink tape
Do not touch here
Prepare the printer and cartridge
1 Make sure the power is on and you
have removed the cardboard from
inside the printer.
2 Open the print cartridge access
door of the printer.
3 Remove the bright pink tape from
the cartridge.
Insert the cartridge
1 If you are replacing a cartridge,
push down and pull outward on the
cartridge in the cradle to remove it.
2 Hold the replacement cartridge with
the label on top. Slide the cartridge
at a slight upward angle into the
cradle so the copper-colored
contacts go in first. Push the
cartridge until it snaps into place.
3 Close the print cartridge access door.
The idle screen of the printer displays an
icon showing the approximate ink level
for the installed cartridge (100%, 75%,
50%, 25%, and nearly empty). No ink-
level icon appears if the cartridge is not
a genuine HP cartridge.
Chapter 1
14 HP Photosmart 370 series