Advanced setup —continued, Correcting sound and picture sync, Changing the remote controller’s id – Onkyo HT-R640 User Manual
Page 71: Press the [receiver] or [amp] button, Input selector receiver or amp, Cine fltr number buttons receiver or amp
71
Advanced Setup
—Continued
When using progressive scanning on your DVD player,
you may find that the picture and sound are out of sync.
With this setting, you can correct this by delaying the
audio signals. You can set it from 0 to 100 milliseconds
(ms) in 10 millisecond steps.
Note:
This setting is not available when the Pure Audio listen-
ing mode is used, or the Direct listening mode is used
with an analog input signal.
If several Onkyo components are used in the same room,
the remote controller’s control codes may overlap with
those of another component. To differentiate the remote
controller’s control codes, you can change its ID to
another number.
Note:
If you change the remote controller’s ID, be sure to set
the same ID on both the remote controller and AV
receiver (see “Changing the AV Receiver’s ID” on
page 69). The default ID for both is 1.
Correcting Sound and Picture Sync
1
Press the [RECEIVER] or [AMP]
button.
2
Press and hold, for more than 4
seconds, the input selector but-
ton for the input source that you
want to correct.
This can be the [DVD], [VIDEO 1],
[VIDEO 2], [VIDEO 3] or [VIDEO 4]
input source.
3
Use the Left and Right [
]/[
]
buttons to adjust the delay from 0
to 100 milliseconds in 10 milli-
second steps.
MUTING
PREVIOUS
MENU
GUIDE
TOP MENU
SETUP
RETURN
PLAYLIST/CAT
PLAYLIST/CAT
--/---
TAPE/AMP
M D/CDR
HDD
CABLE
STANDBY/ON
DIMMER
ENT
D TUN
SLEEP
10
11
12
INPUT SELECTOR
REMOTE MODE
V
1
V
4
V
2
V
3
C D
TAPE
TUNER
DVD
MULTI CH
T V
VOL
VOL
SAT
VCR
T V
DVD
RECEIVER
C D
INPUT
+10
0
CLR
1
2
3
4
5
6
7
8
9
ENTER
CH
DISC
ALBUM
INPUT
SELECTOR
RECEIVER
or AMP
RECEIVER
AMP
V
1
V
2
V
3
DVD
1
V
4
4
2
3
6
Changing the Remote Controller’s ID
1
Press and hold the [RECEIVER] (or
[AMP]) and the [CINE FLTR] at the same
time.
The [RECEIVER] or [AMP] button lights up.
2
Use the number buttons to enter a remote
control ID.
You can enter 1, 2, or 3.
MUTING
PREVIOUS
MENU
GUIDE
TOP MENU
SETUP
RETURN
PLAYLIST/CAT
PLAYLIST/CAT
RANDOM
SUBTITLE
PLAY MODE
AUDIO
REPEAT
RC-
668M
HDD
DVD
VCR
LISTENING MODE
T V
DISPLAY
TEST TONE
CH SEL
SURROUND
STEREO
CINE FLTR
LEVEL+
LEVEL-
L NIGHT
AUDYSSEY
VOL
VOL
INPUT
ENTER
CH
DISC
ALBUM
TAPE/AMP
M D/CDR
HDD
CABLE
STANDBY/ON
10
11
12
INPUT SELECTOR
REMOTE MODE
V
1
V
4
V
2
V
3
C D
TAPE
TUNER
DVD
MULTI CH
VCR
T V
DVD
RECEIVER
C D
1
2
3
4
5
6
7
8
9
CINE FLTR
Number
buttons
RECEIVER
or AMP