Oki 7300 User Manual
Oki Printers

C7100/7300/C7500
Duplexer
Installation Instructions
Duplexer Part Number: 70040401
58364601
Phase 1 - Install
If you will be using the duplex
unit to print complicated files
with graphics, you need to pur-
chase and install 64 MB additional
printer memory (OKI # 70041001).
1. Unpack the duplex unit and remove
any shipping materials.
2. Turn off the printer, then open the
front cover.
3. Locate the slides inside the printer.
4. Place the duplex unit guide rails on
the slides, then push the duplex unit
all the way into the printer.
5. Close the front cover.
6. Turn on the printer.
Phase 2 - Activate the Duplex
Unit in the Driver
W
INDOWS
® PCL D
RIVER
1. Click
Start — Settings —
Printers
. The
Printers
dialog box
opens.
2. Right-click the OKI C7100, C7300
or C7500 PCL printer icon, then
click
Printing Preferences
(Windows 2000),
Properties
(Windows XP, Me, 98, 95) or
Document Defaults
(Windows
NT 4.0).
3. On the
Paper
tab, click
Device
options. Or, with Windows XP,
select the
Device Option
tab.
4. Click
Duplex option unit
to select
it, then click
OK
.
5. Click
OK
, then close the Printers
dialog box.
W
INDOWS
P
OST
S
CRIPT
® D
RIVER
1. Click
Start — Settings —
Printers
. The
Printers
dialog box
opens.
2. Right-click the OKI C7100, C7300
or C7500 PostScript printer icon,
then click
Properties
.
3. Change the setting:
W
INDOWS
XP, 2000
AND
NT 4.0:
a. Click the
Device Settings
tab.
b. Scroll down to
Installable
Options
and click
Duplex
.
c. Under
Change ‘Duplex’ Set-
ting
, click
Installed
.
W
INDOWS
M
E
, 98
AND
95:
a. Click the
Device Options
tab.
b. Click
Duplex
.
c. Under
Change
setting for
:
Duplex
, click
Installed
.
4. Click
OK
, then close the Printers
dialog box.
M
ACINTOSH
® D
RIVER
(OSX)
1. As of OS 10.1.5, Apple has not
enabled Printer Options
adjustment. Therefore, this
selection is unavailable.
M
ACINTOSH
® D
RIVER
(C
LASSIC
)
1. Activate
Chooser
from the Apple
menu.
2. Select
LaserWriter 8
.
3. Click
Printer — Setup
.
4. Click
Configure
.
5. Change the
Duplex
setting to
Installed
.
6. Click
OK
twice.
7. Close
Chooser
.
!
Document Outline
- Phase 1 - Install
- Phase 2 - Activate the Duplex Unit in the Driver
- 1. Click Start — Settings — Printers. The Printers dialog box opens.
- 2. Right-click the OKI C7100, C7300 or C7500 PCL printer icon, then click Printing Preferences (W...
- 3. On the Paper tab, click Device options. Or, with Windows XP, select the Device Option tab.
- 4. Click Duplex option unit to select it, then click OK.
- 5. Click OK, then close the Printers dialog box.
- 1. Click Start — Settings — Printers. The Printers dialog box opens.
- 2. Right-click the OKI C7100, C7300 or C7500 PostScript printer icon, then click Properties.
- 3. Change the setting:
- a. Click the Device Settings tab.
- b. Scroll down to Installable Options and click Duplex.
- c. Under Change ‘Duplex’ Setting, click Installed.
- a. Click the Device Options tab.
- b. Click Duplex.
- c. Under Change setting for: Duplex, click Installed.
- 4. Click OK, then close the Printers dialog box.
- 1. As of OS 10.1.5, Apple has not enabled Printer Options adjustment. Therefore, this selection i...
- 1. Activate Chooser from the Apple menu.
- 2. Select LaserWriter 8.
- 3. Click Printer — Setup.
- 4. Click Configure.
- 5. Change the Duplex setting to Installed.
- 6. Click OK twice.
- 7. Close Chooser.
- Limited Warranty: United States