Olympus PFL-01 - Manual (Page 5)

E-8 E-7
Disclaimer
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-1
Please read the following before using the product ⋯⋯⋯⋯⋯E-1
For safe use
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-1
Batteries
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-3
For Prevention of Water Leakage Accidents ⋯⋯⋯⋯⋯⋯⋯⋯E-4
Handling the Product
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-5
Contents ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ E-7-8
1. Preparations ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ E-9
Checking the contents of the package
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-9
Names of the parts ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-10
Preparing the case
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-11
Attaching/removing/the diffuser plate
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-11
Connection to the camera case
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-12
1) Connecting the underwater TTL cable
⋯⋯⋯⋯⋯⋯⋯⋯E-12
2) Connecting the hot shoe cable
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-13
3) Mounting on an arm ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-14
2. Advance Check of the Case ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ E-15
Advance test before use
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-15
Advance Test
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-15
3. Insertion of the electronic flash ⋯⋯⋯⋯⋯⋯⋯⋯ E-16
Checking the electronic flash ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-16
Checking the Batteries
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-16
Inserting in the case
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-16
Which electronic flashes can be used?
⋯⋯⋯⋯⋯⋯⋯⋯⋯E-16
Opening the case ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-17
Inserting the flash
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-17
Insertion of silica gel
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-18
Check the loading status
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-19
Seal the Case ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-19
Perform the final check
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-20
Visual inspection
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-20
Setting she flush power to ON and OFF
⋯⋯⋯⋯⋯⋯⋯⋯E-20
Final Test ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-21
Contents
4. Taking photos underwater ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ E-22
Setting the flash mode ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-22
Underwater TTL AUTO shooting
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-22
Underwater MANUAL shooting
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-22
5. Handling after use ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ E-23
Wipe off any waterdrop ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-23
Removing the electronic flash
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-24
Cleaning the case with pure water
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-24
Disconnecting the TTL cable
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-25
Drying the case and TTL cable ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-25
6. Maintaining the Waterproof Function ⋯⋯⋯⋯⋯ E-26
Remove the O-ring.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-26
Remove any sand, dirt, etc. ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-26
Install the O-ring.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-27
How to Apply Grease to the O-ring
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-27
Replace consumable products.
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-28
7. Appendix ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ E-29
Q & A on the use of the PFL-01
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-29
After-sale Service
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-34
Specifications
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯E-35
*PFL-01(E).qxd 03.11.27 3:14 PM ページ E-7 (1,1)