Oricom W1 - Manual (Page 14)

14
3. Press OK to save the name. You will not be able to save it if this
name already exists in the phonebook. Edit the name and try again.
4. Edit the number if necessary and press OK to save it.
You have saved the number as a phonebook record. This record in the
redial list will now show the name that you have assigned to this number.
Deleting a previously dialled number
While you are viewing a previously dialed number, you can delete it by
1. Press
DEL .
2. Press OK to confirm.
USING THE PHONEBOOK
Your phone can store up to 10 phonebook records. Each record can
hold up to 8 characters for name, and up to 20 digits for phone number.
A record may contain no name but when it does, the name is unique.
At any time during phonebook programming, you can press
EXIT to quit
the programming or cancel the confirmation.
Adding phonebook records
1. During standby mode, enter the phone number for the new record. A
phone number can contain up to 20 digits.
2. Press and you are prompted to enter the name for this record.
3. Use the number keys to enter the name. If you make a mistake, use
DEL to do the editing. A name can contain up to 8 characters.
4. Press OK to confirm the name. You will be alerted to edit the name
if it is a duplicated name in the existing phonebook records.
5. You are now prompted with the phone number that you just entered.
Edit the number if necessary.
6. Press OK to save the number.
The phonebook record is now successfully stored. Repeat steps 1 to 6
to add another record.
Editing phonebook records
1. During standby mode, press
.
2. Press e or f to search for the record that you would like to edit.
Or you can use the number keys to jump directly to the record
starting with the corresponding letters of that key.
3. Press to select the record and edit the name.
4. Press DEL to delete a character / number.
5. Press OK to confirm name change and edit the number.