Oricom W1 - Manual (Page 10)

10
Making an external call
Your phone allows you to dial out a phone number in various ways.
Normal dialling
1. Press and wait for the dial tone.
2. Use the number pad to dial the phone number. The display shows
the digits as you enter them.
3. When you enter more than 12 digits, turns on. In this case, you
only see the last 12 digits on the screen.
Predialing
Pre-dial allows you to enter a telephone number and verify it on the
screen before you place the call. The screen displays the last 12 digits
dialled but you can enter up to 20 digits.
1. Enter the phone number.
2. To enter a pause, press and hold
. A pause is displayed as “P”.
3. When you enter more than 12 digits, turns on. If you attempt to
enter more than 20 digits, you’ll hear a reject tone.
4. If you make a mistake, press DEL to erase one digit at a time. Or
you can press EXIT to clear the entire number and return the
phone to standby.
5. Press to dial out the number.
Dialling from a phonebook record
1. Press
during standby. in the display turns on.
2. Press e or f to search for the record that you would like to dial.
Or you can use the number keys to jump directly to the record
starting with the corresponding letters of that key.
3. Press OK repeatedly will show the name and number of the record
accordingly.
4. Press to dial out the number.
Redialling the last dialled number
1. Press
. The last number dialled is displayed.
2. turns on when the number contains more than 12 digits. Press
OK to view the off-page digits.
3. Press to dial out the number.
During an external call
Call timer
01-10