beautypg.com

Troubleshooting guide – Onkyo DX-R700 User Manual

Page 45

background image

45

Troubleshooting guide

Messages during playback, name input, and other situations (continued)

Trouble

Cause

Remedy

The power does The power cord is not properly

Plug the power cord properly into a mains

not turn on

plugged in.

power supply.

The component where the power cord is

Turn on the component into which the

plugged into is not turned on.

power cord is plugged.

No sound is

The speakers are not properly

Connect the speakers following the

output from

connected.

procedure given in “Connecting the

the speakers

DX-R700” on page 15.

Cannot record

The components are not properly

Connect the components following the

connected.

procedure given in “Connecting the
DX-R700” on page 15.

A finalized CD-R or CD-RW is being

Use an unfinalized disc.

used.

The input switch is not properly set.

Switch to a properly connected input
source (see pages 20, 22, 24).

The recording level adjustment is

Adjust the recording level to a proper level

set too low.

(see page 21).

Recorded

The components are not properly

Connect the components following the

sound is

connected.

procedure given in “Connecting the

distorted

DX-R700” on page 15.

Recording is being affected by

Either turn off the television or move the

the television.

DX-R700 away from the television.

The disc is damaged or cracked.

Use another disc.

The recording level adjustment is

Adjust the recording level to a proper level

set too high.

(see page 21).

The disc is too dirty.

Clean the disc.

Remote

The remote controller batteries

Replace all the remote controller batteries

controller

are dead.

with new batteries (see page 11).

does not work

There is an object between the

Remove the obstructing object (see page 11).

DX-R700 and the remote controller
obstructing the signals.

The remote controller is being used

Use the remote controller within its

outside of its operational range.

operational range (see page 11).

A recorded

The disc was not finalized

Perform the finalization process

CD-R cannot

after recording.

(see page 33).

be played in

(The CD-R indicator lights when

normal CD

the disc is played with the

players

DX-R700)