Onkyo DX-R700 - Manual (Page 32)

32
Entering names
DUAL DIGITAL INPUT
ANDBY ST
OFF ON
STANDBY/ON
POWER
AUDIO CD RECORDER DX-R 700
MEMORY CLEAR
REPEAT FINALIZE
STOP PLAY PAUSE
REC
PHONES LEVEL
MIN MAX
PHONES
YES
INPUT DISPLAY
EDIT/ NO
PUSH TO ENTER
MULTI JOG
STANDBY/ ON OPEN / CLOSE
RANDOM MEMORY REPEAT
NAME ABC DEF
2 3 1
SCROLL GHI MNO J K L
4 5 6
CLEAR
DISPLAY ENTER
PQRS TUV W XYZ
10/0 >10
7 8 9
REC
q MULTI JOG w
YES EDIT/NO
NAME
3
Press the MULTI JOG dial.
PUSH TO ENTER
MULTI JOG
YES
Erasing the disc name, artist name,
and track names
Follow the steps below to erase all the name
information retained in the DX-R700. Set the DX-
R700 to the stop state in advance.
1
Press the EDIT/NO button and turn the
MULTI JOG dial until “Name Erase?”
appears.
2
Press the MULTI JOG dial.
Pressing the YES button provides the same
operation. When completed, “Complete”
appears in the display and the DX-R700 will
stop. See page 36 to erase the names written to
a (finalized) CD-RW.
EDIT/ NO
PUSH TO ENTER
MULTI JOG
Pressing the YES button provides the same
operation. The cursor appears flashing. To stop
entering names while the cursor is flashing,
press the YES button with holding the EDIT/NO
button pressed, or press the e STOP button.
Enter a track name in the same method as that
described in step 4 of “Entering a disc name or
artist name” (see page 29).
4
Press the YES button to end name input.
With the RC-448C remote controller, press the
NAME button.
To write the entered names to the disc
Finalize the disc. The names you enter are
temporarily stored in the DX-R700 and then written
to the disc during finalization. Be aware of the
following notes when finalizing a disc.
Notes:
• The name information for the disc is left in the DX-
R700 if you have ejected the disc without finalizing
it. In this case, even if you insert a new disc and
attempt to enter names for it, “Erase Name” will
appear and the attempt will fail. To solve this, erase
the retained names or insert the previous disc,
finalize it, and then replace it with the new disc.
• You cannot finalize the disc if it has no disc name.
• If you enter names for a blank disc and eject it
without recording, the name information will
not be retained in the DX-R700.
• You cannot enter names for the disc during auto
finalization.
PUSH TO ENTER
MULTI JOG
RC-448C DX-R700
NAME