Onkyo K-505TX - Manual (Page 17)

17
Befor
e Using
Connections
Other Information
Operation
4
Insert a CD into the CD player.
5
Press DOLBY NR until the Dolby
NR mode you want to record
with lights in the display.
See “Dolby Noise Reduction Systems” on
page 15 for Dolby NR mode information.
Each press changes the indicator in the
display in the following order:
B (Dolby B NR) C (Dolby C NR)
The indicator goes off.
6
Press CD DUBBING ALBUM for
Album dubbing or CD DUBBING
FADE for Fade out dubbing.
CD dubbing starts after the unit has
completed the following operations:
• The unit rewinds the tape if the tape is
not completely rewound to the
beginning.
• The unit adjusts the recording level to
its optimum level.
For the dubbing mode, refer to the
introduction on the previous page.
Tip
If you need further fine adjustment to the
recording level, use the REC LEVEL / buttons
(you can adjust the level from –6 to 6).
Note
If the initial track on the CD is very long and is not
completely recorded on one side of the tape,
Album dubbing or Fade out dubbing will not
operate. If the unit is in the reverse mode (
), the
rest of the CD will be kept recording on the other
side of the tape continuously.
To stop CD dubbing
Press on the unit or CD player.
K-505TX (This unit) C-705TX (CD player)
B
Indicator lights.
CD DUBB
ALBUM
FADE
ALBUM
CD DUBBING
FADE
(Continued on the next page)
Display
DOLBY
NR
STANDBY/ON
STANDBY
STEREO CASSETTE TAPE DECK
ALBUM
DOLBY NR
REV. MODE
COUNTER RESET
REC LEVEL
CD DUBBING
FADE
CASSETTE LOADING MECHANISM
REC LEVEL /
CD DUBBING ALBUM/FADE
DOLBY NR
STANDBY
TR-1
DISPLAY
COMPACT DISC PLAYER
DUAL OPTICAL OUTPUT
STANDBY/ON