Omega OMA-P1104 - Manual (Page 83)

69
Chapter 6: Acknowledgment, Status Report, and Remote Access
Chapter 6: Acknowledgment,
Status Report, and
Remote Access
In addition to communication and alarm monitoring
capabilities, the OMA-P1104 will also respond to your
instructions and provide you with access to information on
monitored conditions at all times.
By issuing commands to the unit, either at the installation site
or over standard telephone lines, the following features may be
activated:
• Acknowledgment of existing alarms
• The Status Report on all monitored conditions.
6.1 Alarm Acknowledgment
When the OMA-P1104 dials out with an alarm message, it will
request acknowledgment before hanging up. Acknowledgment
indicates to the unit that the alarm message has been received.
Upon acknowledgment, the OMA-P1104 will cancel the dial-
out sequence.
There are three ways* that an alarm is acknowledged directly:
• Local Acknowledgment
• Touch-Tone TM Acknowledgment
• Callback Acknowledgment
* A fourth method of alarm acknowledgment is indirect. Refer
to Max Calls, Chapter 4, Section 4.12 for an example of
automatic alarm acknowledgment.
6.1.1 Local Acknowledgment
To acknowledge an alarm locally (directly at the installation
site of the OMA-P1104), press any key.
6.1.2 Touch-Tone TM Acknowledgment
This method of remote alarm acknowledgment works with a
Touch-Tone
TM telephone.