Chapter 4: communications programming 31, 4 special dialing to a beeper or pager, Press phone number – Omega OMA-P1104 User Manual
Page 45: What is, Enter
Chapter 4: Communications Programming
31
4.
Enter the telephone number using the number keys. The
OMA-P1104 will recite the digits as they are pressed.
1
CALL
DELAY
2
VOICE
REPS
3
INTERCALL
TIME
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
7
RECOGNITION
TIME
8
CLOCK
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
5.
Position the pound (#) or asterisk (*) within the telephone
number where required by pressing SET (where the pound
is located) or WHAT IS (where the asterisk is located).
The OMA-P1104 will beep each time pound or asterisk is
pressed.
SET
#
–OR–
WHAT
IS
*
6.
Enter any remaining digits of the telephone number.
7.
Press ENTER. The OMA-P1104 will say “Enter.”
ENTER
TONE
PM
ENTER
TONE
PM
4.4.4 Special Dialing to a Beeper or Pager
The following example demonstrates just one solution to
programming the OMA-P1104 for dialing to a beeper or pager.
Many other key sequences will also work. Start with steps 1–3
below; next, enter special dialing keys where required for your
beeper or pager service.
To incorporate a pound or asterisk:
1.
Press SET.
SET
#
2.
Press PHONE NUMBER.
PHONE
NUMBER