Omega OMA-P1104 - Manual (Page 79)

Chapter 5: Alarm Programming
65
1. Press SET.
SET
#
2. Press RECOGNITION TIME.
7
RECOGNITION
TIME
3. Press SOUND. The OMA-P1104 responds: “Enter
seconds.”
9
LISTEN TIME
SOUND
4. Using the number keys, enter the number of seconds. The
OMA-P1104 will recite the digits as they are pressed.
1
CALL
DELAY
2
VOICE
REPS
3
INTERCALL
TIME
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
7
RECOGNITION
TIME
8
CLOCK
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
5. Press ENTER. The OMA-P1104 responds: “OK.”
ENTER
TONE
PM
ENTER
TONE
PM
5.11 High Sound Alarm Enable/Disable
The OMA-P1104 monitors sound through the built-in
microphone. When the sound level suddenly exceeds the
programmed high sound limit, the OMA-P1104 will respond to
an alert condition. The increased sound level must continue
throughout the programmed recognition time. The default for
high sound alarm is enabled (on).
NOTE