Onkyo HT-RC260 User Manual
Page 50
50
En
Controlling Zone 2 with the Remote
Controller
Note
• To control Zone 2, you must press the remote controller’s
ZONE2 first.
Adjusting the Volume for Zone 2
■
Operating with the remote controller
■
Operating on the AV receiver
If your Zone 2 speakers are connected to a receiver or inte-
grated amp in Zone 2, use its volume control to adjust the
volume.
Muting Zone 2
■
Operating with the remote controller
Tip
• To unmute, press ZONE2 followed by MUTING again.
Note
• Only analog input sources are output by the ZONE 2 LINE
OUT and FRONT HIGH OR FRONT WIDE OR ZONE 2
SPEAKERS L/R terminals. Digital input sources are not out-
put. If no sound is heard when an input source is selected, check
if it’s connected to an analog input.
• While Powered Zone 2 is being used, listening modes that
require surround back speakers or front high speakers or front
wide speakers (6.1/7.1), such as Dolby Digital EX, DTS-ES,
Dolby Pro Logic IIz height, and Audyssey DSX™ are unavail-
able.
• While Zone 2 is on,
functions will not work.
• You cannot select different AM or FM radio stations for your
main room and Zone 2. The same FM/AM radio station will be
heard in each room. For example, if you have an FM station for
the main room, that station will also be used in Zone 2.
• Zone 2 can also be unmuted by adjusting the volume.
1
Press
ZONE2 and then press ON/STANDBY.
Zone 2 turns on, the ZONE 2 indicator lights.
2
To select an input source for Zone 2, press
ZONE2, followed by an input selector button.
To select AM or FM, press the TUNER input selec-
tor repeatedly.
Note
• You cannot select different AM or FM radio stations for
your main room and Zone 2. The same FM/AM radio sta-
tion will be heard in each room.
3
To turn off Zone 2, press
ZONE2 followed by ON/
STANDBY.
ON/STANDBY
MUTING
VOL /
ZONE2
Input selector buttons
1
Press
ZONE2.
2
Use
VOL / to adjust the volume.
1
Press
ZONE 2 (the ZONE 2 indicator and Zone 2
selector on the display flashes).
2
Use
–/+ within 8 seconds to adjust the volume.
Press
ZONE2 followed by MUTING.