Olympus E-450 - Manual (Page 89)

89
EN
9
Custom
izi
ng your
camera
Custom Menu 1g RECORD/ERASE
RAW+JPEG ERASE
You can select the method to erase images recorded in RAW+JPEG. This function can only
be used to erase one frame.
[JPEG] Erases all JPEG image files, leaving only the RAW image files.
[RAW] Erases all RAW image files, leaving only the JPEG image files.
[RAW+JPEG] Erases both image file types.
x
Notes
• This function is effective only if deleting one frame. For all-frame erase or erasing selected
frames, both RAW and JPEG will be erased regardless of this setting.
FILE NAME
When you take a picture, the camera assigns it a unique file name and saves it in a folder.
File names are assigned as shown in the illustration below.
[AUTO]
Even when a new card is inserted, the folder numbers are retained from the previous
card. If the new card contains an image file whose file number coincides with one
saved on the previous card, the new card’s file numbers start at the number following
the highest number on the previous card.
[RESET]
When a new card is inserted, folder numbers start at 100 and file numbers start at
0001. If a card containing images is inserted, the file numbers start at the number
following the highest file number on the card.
• When both the Folder and File No. reach their respective maximum number (999/9999), it is not
possible to store additional pictures even if the card is not full. No more pictures can be taken.
Replace the card with a new one.
dpi SETTING
You can set the resolution for printing images in advance. The set value is recorded on the
card with the images.
[AUTO] Automatically set according to the image size.
[CUSTOM] You can make the desired setting. Press d to display the setting screen.
s0029_e_00_0_unified.book Page 89 Monday, March 2, 2009 5:26 PM