Olympus E-450 - Manual (Page 30)

30
EN
1
B
asic c
a
m
er
a operation
s
Normally, current camera settings (including any changes you have made) are retained when
the power is turned off. To reset the camera to the factory default settings, set [RESET]. You
can register settings in advance to [RESET1] and [RESET2]. The camera settings at that
time are registered in [RESET1] and [RESET2]. For details on the registered functions, refer
to “Functions that can be registered in Custom Reset Settings” (
gP. 121).
Registering [RESET1]/[RESET2]
1
Select either [RESET1]/[RESET2] to register and press d.
• If settings have already been registered, [SET] is displayed next to [RESET1]/[RESET2].
Selecting [SET] again overwrites the registered setting.
• To cancel the registration, select [RESET].
2
Select [SET] and press the i button.
Using reset settings
You can reset the camera to [RESET1] or [RESET2] setting or restore the factory default
settings.
[RESET]
: Resets to the factory default settings. For the default settings, see
“Menu directory” ( gP. 122).
[RESET1]/[RESET2] : Resets to the registered settings.
1
Select [RESET], [RESET1] , or [RESET2] and press
the
i button.
2
Use ac to select [YES], then press the i
button.
Resetting to the factory default settings
Menu MENU[W][CUSTOM RESET]
Menu MENU[W][CUSTOM RESET]
RESET1
YES
NO
CANCEL SELECT GO
s0029_e_00_0_unified.book Page 30 Monday, March 2, 2009 5:26 PM