Onkyo TX-DS595 - Manual (Page 24)

24
3. Press the jog dial.
The TX-DS595 will scan until it reaches a
station broadcasting traffic information. If
“NOT FOUND” appears on the display, a
TP station cannot be located.
2. Press the RT/PTY/TP button three
times.
Listening to RDS broadcasts
Displaying Radio Text (RT)
If the station you are currently tuned into is broadcasting RT signals,
they will be displayed in the front display on the TX-DS595. If the
station does not, this function will be ignored.
1. To display the radio text, press the
RT/PTY/TP button once.
3. Using the jog dial, select the PTY
program type you desire.
4. Press the jog dial.
The TX-DS595 will scan until it reaches a
station of the program type you selected. It
will then stop briefly at that station before
continuing on until it reaches the next
station. Pressing the jog dial stops the PTY
scan at that point. If you press the RT/PTY/
TP while “NONE” is displayed, “PTY ?”
will appear. In this case, return to step 3.
5. Press the jog dial when it reaches
the station that you want to listen to.
“NOT FOUND” will appear when no RDS
signal is being received from the station.
“< TP >” will appear if the current station is broadcasting TP
signals. This station will periodically broadcast traffic
information. To find a different station, proceed to the next step.
Also, if “TP” is displayed, proceed to the next step.
Performing a PTY scan
1. Press the FM input source button.
RT/PTY/TP
2. Press the RT/PTY/TP button twice.
The current program type appears on the
display.
PUSH TO ENTER
DSP / MODE ADJ
Performing a TP scan
1. Press the FM input source button.
PUSH TO ENTER
DSP / MODE ADJ
PUSH TO ENTER
DSP / MODE ADJ
RT/PTY/TP
FM RT/PTY/TP
FM
PUSH TO ENTER
DSP / MODE ADJ
• If the current station you are listening to is not an RDS station,
only the frequency of the station appears.
• If “WAITING” appears on the display, more time is required to
receive the RT information. When the information is received,
the characters will scroll across the front display.
• If “NO TEXT DATA” appears on the display, RT information is
not available.
• The display shows the frequency for 3 seconds and returns to
program service name.
STANDBY/ON
STANDBY
OFF ON
POWER
MASTER VOLUME
BASS TREBLE
AV RECEIVER TX-DS 595
PHONES FM AM PHONO C D TAPE
CH LEVEL
VIDEO 2 VIDEO 3 VIDEO 1 DVD
VCR
TUNING PRESET SMART SCAN NAVIGATOR PRESET MEMORY FM MODE DISPLAY RT / PTY/ TP
PUSH TO ENTER
DSP / MODE ADJ SETUP
RETURN
A B SPEAKERS
AUDIO SELECTOR
RT/PTY/TP
FM
Jog dial