Oregon Scientific Scientific Cable Free Weather Station BAR928 - Manual (Page 3)

EN
2
H PRESSURE UNIT SLIDE SWITCH
Selects between mb/hPa and inHg display
S MOON PHASE SCANNER
Displays the current moon phase or that of the date checked
T THERMO BUTTON
Sets the unit in indoor or outdoor-remote temperature mode
U MEMORY BUTTON
Displays the maximum or minimum temperature or indoor
relative humidity or erases the memory
V HISTORY BUTTON
Displays the pressure history of previous hours
W UP ( ) AND DOWN ( ) BUTTONS
Increases or decreases the value of a setting, scan the
moonphase status
X ALARM ON/OFF BUTTON
Displays the alarm time or sets the alarm status
Y MODE BUTTON
Changes the display mode of the clock or triggers the clock
setting mode
Z RESET BUTTON
Resets the unit by returning all settings to their default values
AA BATTERY COMPARTMENT
Accommodates four UM3 or AA-size batteries
AB TABLE AND CONTROL STAND
Acts as control panel and supports the unit when lying flat.
MAIN FEATURES: REMOTE UNIT
A LCD
Displays the current temperature monitored by the remote
unit
B LED INDICATOR
Flashes when the remote unit transmits a reading
C
°
C/
°
F SLIDE SWITCH
Selects between Centigrade ( °C) and Fahrenheit (°F)
D RESET BUTTON
Returns all settings to default values
E BATTERY COMPARTMENT
Accommodates two UM4 or AAA-size batteries
F WALL-MOUNT HOLDER
Supports the remote unit in wall-mounting
G REMOVABLE TABLE STAND
For standing the remote unit on a flat surface
BEFORE YOU BEGIN
For best operation,
1. Insert batteries for remote units before doing so for the main unit.
2. Position the remote unit and main unit within effective transmis-
sion range, which, in usual circumstances, is 30 meters.
Though the remote unit is weather proof, it should be placed away
from direct sunlight, rain or snow.
BATTERY INSTALLATION:
REMOTE UNIT
The remote unit uses two UM4 or AAA-size batteries. To install
them,
1. Remove the screws on the battery compartment.
2. Insert the batteries strictly according to the polarities shown
therein.
3. Select the temperature display unit on the
°C/°F slide switch.
4. Replace the battery compartment door and secure its screws.
Replace the batteries when the battery low (BATT) indicator of the
outdoor temperature window lights up.
BAR928-E R1 OP 8/21/04, 11:54 PM 2