beautypg.com

Oregon Scientific Walk Around the World Pedometer PE988 User Manual

Oregon Scientific Sports and recreation

background image

Walk Around the World

Pedometer

MODEL: PE988

USER MANUAL

INtRODUctION

Thank you for selecting the Oregon Scientific™ Walk Around

the World Pedometer (PE988).

The PE988 is more than just a traditional pedometer. On

top of the traditional features such as step count, distance

count and calorie count, this product is designed with the

purpose of blending fun, challenges and rewards into the

sport of walking.

IMPORtANt Do not immerse the pedometer in water.

cONtROL bUttONS

1

2

3

1.

SEt: To confirm and move to next setting option

2.

DISP: To select options; to increase values

3.

MODE: To select modes; to decrease values

LcD

1.

: Indicates battery power is low

2.

: Indicates achieved summary of the trip is displayed

3.

: Indicates targets to achieve of the selected trip is

displayed (trip diary)

4.

: Indicates key tone is On

5.

: Indicates target summary of the selected trip plan is

displayed

6.

: Indicates the button(s) that can be

pressed

7.

: Indicates alarm is ON

8.

: Indicates on which day (1-7) before is the

displayed data recorded

GEttING StARtED

ActIvAtE PEDOMEtER (fIRSt-tIME USE ONLy)

Remove the battery-saving strip by pulling it out from the

battery compartment. The unit will automatically prompt you

to set your stride length. Refer to Set Up Mode to set your

stride length and other settings.

NOtE The unit will go to Sleep Mode like the screen below

then the display will turn off if no movement is detected for 3

minutes; once there is movement detected, the display will

turn on.

NOtE To effectively use the pedometer for calculating

calorie consumption (based on step count and user body

weight) and distance walked (based on step count and

length of user’s stride), you are advised to set the time and

your user data in the Set Up Mode.

cARRyING tHE PEDOMEtER

The PE988 is a sensor type pedometer that can detect steps

in any dimension it is carried. It can be carried in pockets

and handbags or around the neck by using the lanyard

provided.

bAttERy REPLAcEMENt

The pedometer uses a CR2032 3V battery, which has

already been installed.

Indicates battery power is low.

to replace battery:

1. Use a small Philips screwdriver to remove battery

compartment lid.

2. Remove the old battery and insert the new one, matching

the polarities.

3. Replace the lid by screwing it back into place using a

small Philips screwdriver.

IMPORtANt When the battery compartment is opened or

battery is replaced, all data in the pedometer will be reset.

OPERAtION MODES

The PE988 has 5 modes of operation. Press

MODE to toggle

among the 5 modes.

NOtE After a mode is selected, either wait until the moving

banner stops to enter the mode you have selected or you

can press

SEt to skip the banner.

DAILy MODE

In the Daily Mode, you can view:

• the time and current step count (default display)
• the current step count, current distance walked, exercise

time and calorie consumption (by reverse display of the

unit)

• the achieved summary of the selected trip plan (if a trip

plan is selected)

NOtE The step count, exercise time, distance walked and

calorie consumption values will reset automatically to zero

every night at 00:00.

to view the current step count, current distance walked,

exercise time and calorie consumption:

Reverse the unit 180° upside down.

The default display will be changed to show the current

distance walked and step count page. After 3 seconds, the

unit will auto-toggle to the next page showing the current

exercise time and calorie consumption. In reversed display,

the unit will auto-toggle between these 2 pages.
To resume default display, reverse the unit to its original

position.

EN

Current time and step count

Current distance walked and

step count

Current exercise time and

calorie consumption

to view the accumulated cities, rewards, days,

distance and steps achieved of the trip plan (achieved

summary):

Press

SEt during the default display.

The cities achieved will be displayed and after 3 seconds,

the unit will auto-toggle to show the accumulated rewards,

days, distance and steps achieved. The achievement bar

shows how far you have achieved before the target. After 3

seconds, it will auto-toggle to the default display.

Cities achieved

Rewards achieved
(refer to table below)

Days achieved and
trip plan

Distance and steps
achieved

Achievement bar

The table below lists the rewards that you will receive if

target cities are achieved.

Borsch soup

Sushi

Noodle

Tea

Hotdog

Beijing duck

Croissant

Pizza

Jamon

Chocolate

Kebab

Feijoada

Lobster

Fish

Steam bun

Pretzel

Herring

Waffle

Reward to receive

City achieved

Moscow

Tokyo

Hong Kong

London

New York

Beijing

Paris

Rome

Barcelona

Zurich

Dubai

Sao Paulo

Sydney

Cape Town

Shanghai

Berlin

Stockholm

Brussels

WALK MEMORy MODE

In the Walk Memory Mode, you can view the records of your

distance walked, number of steps, exercise time and calorie

consumption for the past 7 days.

1. Press

MODE to toggle to Walk Memory Mode. The unit

will auto-toggle between the distance walked and number

of steps, and the exercise time and calorie consumption.

Press

SEt to fast toggle.

Distance and steps walked

Exercise time and

calorie consumption

2. Press

DISP or MODE to select which day to view: DISP

to go to the next day,

MODE to go to the previous day.

3. To exit and return to the default display, either keep on

pressing

DISP to toggle through all 7-day records or

refrain from pressing any button for at least 3 seconds.

to reset records:

You cannot reset the records manually. The pedometer is

designed to automatically reset whenever a new trip plan is

selected.

tRIP PLAN MODE

In the Trip Plan Mode, you can select an exercise (trip) plan

and achieve its target.
If a trip plan is already selected, this Mode will be hidden

automatically. You have to complete the selected trip plan

before you can select a new one.
If no trip plan has been selected yet, follow the steps below

to select a trip plan.

1. Press

MODE to toggle to Trip Plan Mode.

2. The unit will prompt you to select your exercise (trip)

plan. You have 6 trip plans to select from (refer to the

table below). Press

DISP to select and SEt to confirm.

After a trip plan is selected, the unit will auto-toggle and

show the screens below. It will finally auto-toggle to the

default display; you can then start walking.

Starting city and final destination
(e.g. if trip plan 2 is selected, the
starting city is Rome and the final
destination is London)

Target distance and time

3. Start walking continuously for 16 steps or more in order

for the pedometer to start counting steps. Do this every

time you start walking.

The table below lists the 6 trip plans.

tRIP 1

from

to

target distance

(OS-KM)

target time to

achieve (days)

Berlin

Brussels

6.52

1.30329

Brussels

London

3.20

0.640382

London

Paris

3.38

0.67578

total 13.10

total 2.619452

tRIP 2

from

to

target distance

(OS-KM)

target time to

achieve (days)

Rome

Zurich

6.92

1.38374

Zurich

Stockholm

14.74

2.947688

Stockholm Moscow

12.36

2.471424

Moscow

London

24.94

4.9879

total 58.95 total 11.790752

tRIP 3

from

to

target distance

(OS-KM)

target time to

achieve (days)

Tokyo

Hong Kong

28.96

5.7924

Hong Kong Shanghai

12.53

2.506822

Shanghai Beijing

10.62

2.12388

Beijing

Dubai

58.47

11.694212

total 110.59 total 22.117314

tRIP 4

from

to

target distance

(OS-KM)

target time to

achieve (days)

Barcelona Sao Paulo

87.64

17.528446

Sao Paulo Cape town

63.56

12.7111

Cape town Brussels

94.90

18.979764

Brussels

Rome

11.83

2.36523

total 257.92

total 51.58454

tRIP 5

from

to

target distance

(OS-KM)

target time to

achieve (days)

New York Shanghai

118.42

23.68448

Shanghai Stockholm

77.80

15.55903

Stockholm Hong Kong

82.36

16.472942

Hong Kong Dubai

59.16

11.832586

Dubai

Brussels

51.57

10.31369

Brussels

Sao Paulo

96.36

19.272602

total 485.68

total 97.13533

tRIP 6

from

to

target distance

(OS-KM)

target time to

achieve (days)

Barcelona Stockholm

22.94

4.588868

Stockholm London

14.35

2.870456

London

Sydney

169.94

33.988516

Sydney

Tokyo

77.96

15.59121

Tokyo

Berlin

89.12

17.824502

Berlin

London

9.30

1.860004

London

Beijing

81.25

16.2509

Beijing

Sao Paulo

175.94

35.18883

total 640.82 total 128.163286

NOtE:

• 1 km = 1/100 OS-KM
• Walking faster and with longer strides can achieve

the target within lesser days.

tRIP DIARy MODE

In the Trip Diary Mode, you can view your trip plan's detailed

target summary. If no trip plan is selected, this Mode will be

hidden automatically.

Press

MODE to toggle to Trip Diary Mode. The unit will auto-

toggle every 3 seconds, showing the following:

• All starting and destination cities

• The selected trip plan, total days to achieve and total

destination count

• The total distance and days to achieve

SEt UP MODE

In the Set Up Mode, you can set your stride length, weight,

time, alarm and key tone.

1. Press

MODE to toggle to Set Up Mode.

2. Wait for the setting option to flash, then press

DISP or

MODE to select option.

3. Press

SEt to confirm and move to the next setting

option.

The setting sequence is:

• stride length unit (cm / in) [press

DISP]

• stride length value [press

DISP or MODE]

• weight unit (kg / lb) [press

DISP]

• weight value [press

DISP or MODE]

• time format (12 / 24) [press

DISP]

• time (hour and minute) [press

DISP or MODE]

• alarm On/Off [press

DISP]

• alarm time (hour and minute) (if alarm On is selected)

[press

DISP or MODE]

• key tone On/Off [press

DISP]

to silence an activated alarm:

Press any button to silence an activated alarm. If not

deactivated, the alarm will be activated at the same time the

following day.

ANIMAtION

The table below lists the scenarios that are associated with

the animations featured in this pedometer.

ANIMATION

SCENARIO

If you successfully
complete the trip
within target

If you fail to complete
the trip within target

If there is no activity
for 24 hours

Back to default display

Press SET if you
want to select your
next trip then follow
steps 2 and 3 in Trip
Plan Mode, or press
MODE to exit.

Press SET if you
want to select a new
trip then follow steps
2 and 3 in Trip Plan
Mode, or press
MODE to exit.

SPEcIfIcAtIONS

Real time clock

12 / 24 format with hour

/ minute

Step measurement range

0 – 99,999 steps

Distance measurement range

0 – 9999.99 km

(0 – 621 miles)

User adjustable stride length

28 – 152 cm

(11 – 60 inches)

Calorie measurement range

0 – 99,999 kcal

Body weight range

29 – 154 kg

(64 – 340 lbs)

Exercise timer range

99 hr 59 min 59 sec

Water resistance

No

Power

1 x CR2032 3V battery

Operating temperature

-10°C to 40°C

(14°F to 104°F)

Storage temperature

-20°C to 60°C

(-4°F to 140°F)

PREcAUtIONS

To ensure you use your product correctly and safely, read

these warnings and the entire user manual before using the

product:

• Use a soft, slightly moistened cloth. Do not use abrasive

or corrosive cleaning agents, as these may cause

damage. Use lukewarm water and mild soap to clean the

device thoroughly after each training session. Never use

the product in hot water or store it when wet.

• Do not subject the product to excessive force, shock,

dust, temperature changes, or humidity. Never expose

the product to direct sunlight for extended periods. Such

treatment may result in malfunction.

• Do not tamper with the internal components. Doing so will

terminate the product warranty and may cause damage.

The main unit contains no user-serviceable parts.

• Do not scratch hard objects against the LCD display as

this may cause damage.

• Take precautions when handling all battery types.
• Remove the batteries whenever you are planning to

store the product for a long period of time.

• When replacing batteries, use new batteries as specified

in this user manual.

• The product is a precision instrument. Never attempt to

take this device apart. Contact the retailer or our customer

service department if the product requires servicing.

• Do not touch the exposed electronic circuitry, as there is

a danger of electric shock.

• Check all major functions if the device has not been

used for a long time. Maintain regular internal testing and

cleaning of your device. Have your device serviced by an

approved service centre annually.

• When disposing of this product, ensure it is collected

separately for special treatment and not as normal

household waste.

• Due to printing limitations, the displays shown in this

manual may differ from the actual display.

• The contents of this manual may not be reproduced

without the permission of the manufacturer.

NOtE The technical specifications for this product and the

contents of the user manual are subject to change without

notice.

NOtE Features and accessories will not be available in all

countries. For more information, please contact your local

retailer.

AbOUt OREGON ScIENtIfIc

Visit our website (www.oregonscientific.com) to learn more

about Oregon Scientific products.

If you're in the US and would like to contact our Customer

Care department directly, please visit:
www2.oregonscientific.com/service/support.asp

For international inquiries, please visit:

www2.oregonscientific.com/about/international.asp.

EU-DEcLARAtION Of cONfORMIty

Hereby, Oregon Scientific, declares that this Walk Around

the World Pedometer (Model: PE988) is in compliance with

EMC directive 2004/108/EC. A copy of the signed and dated

Declaration of Conformity is available on request via our

Oregon Scientific Customer Service.