beautypg.com

Oregon Scientific PE326CA User Manual

Pedometer with calorie counter

background image

1. Press DIST until the stride length is viewed on the top line

of the display.

2. Insert a thin blunt object into HR / + to increase or MIN

/ - to decrease stride length (30 to 150 cm or 11 to 60
inches)*.

If no changes are made to the Stride function, the unit
automatically returns to clock display after 5 seconds.

NOTE

Individual stride-length varies. Input an appropriate

length for an average stride. To determine length of stride
walk 10 paces and divide distance traveled by 10.

CALORIES

Precise calories burned calculations require taking many
factors into account. The PE326CA uses body weight and
the number of steps taken to give a good estimate.

1. Press CALO until the body weight is viewed on the top

line of the display.

2. Insert a thin blunt object into HR / + or MIN / - to increase

or decrease body weight setting (65 to 340 lbs or 30 to
150 kg)*.

The unit automatically returns to clock display after 5
seconds.

MOTION SENSITIVITY

Follow these important procedures to adjust the Motion
Sensitivity and ensure accurate readings:

1. Correctly position and attach the unit to a belt or

waistband.

2. Reset step counter to zero.

3. Walk at a normal pace; take at least 100 steps.

4. Adjust sensitivity switch if walking speed changes.

Repeat steps 2-4 until accurate reading is obtained.

The following conditions may cause incorrect reading
of steps taken:

1. Uneven walking pace, such as walking in crowded areas

RU RQ XQHYHQ ÀRRU

2. Frequent up and down movements, such as standing up

and/or sitting down; running, jumping, going up and down
stairs etc.

USING THE PEDOMETER

VIEWING STEPS TAKEN

Press CALO when the unit is in clock/calorie display or press
DIST when it’s in clock/distance display.

VIEWING DISTANCE TRAVELED

Press DIST when the unit is in clock/calorie display.

VIEWING CALORIES BURNED

Press CALO when the unit is in clock/distance display.

To reset the values, press RESET in any clock display.

NOTE

The total distance and calories burned will be cleared

along with the total steps.

FITNESS TIPS

7R NHHS ¿W LW JHQHUDOO\ WDNHV D SHUVRQ ZHLJKLQJ NJ WR
walk 10,000 steps to burn approximately 300 calories. The
following diagram will give you some basic reference to the
calorie consumption for people of various weights.

WARNINGS

This product is designed to give you years of service if
handled properly. Observe the following guidelines:

‡

Clean the unit with a slightly damp cloth and mild

detergent.

‡

Never immerse the unit in water. This can cause electrical

shock and damage the unit.

‡

Do not subject the main unit to extreme force, shock, or

ÀXFWXDWLRQV LQ WHPSHUDWXUH RU KXPLGLW\

‡

Do not tamper with the internal components. Doing so

will terminate the unit’s warranty and may cause damage.
The unit contains no user-serviceable parts.

‡

Do not mix new and old batteries or batteries of different

types.

‡

Do not use rechargeable batteries with this product.

‡

Remove the batteries if storing this product for a long

period of time.

‡

Do not scratch the LCD.

‡

Read this instruction manual thoroughly before operating

the unit.

‡

Do not dispose this product as unsorted municipal waste.

Collection of such waste separately for special treatment
is necessary.

7KH FRQWHQWV RI WKLV XVHU PDQXDO DQG WHFKQLFDO VSHFL¿FDWLRQV
are subject to change without further notice. Images not
drawn to scale. The manufacturer and its suppliers hold no
responsibility to you or any other person for any damage
H[SHQVHV ORVW SUR¿WV RU DQ\ RWKHU FODLP WKDW DULVHV IURP
using this product.

SPECIFICATIONS

TYPE DESCRIPTION

Step counter

0 to 99,999 steps

Distance traveled

0 to 999.99 km

(0 to 999.99 miles)*

Stride distance

30 to 150 cm

(11 to 60 inches)*

Calorie display

0.1 to 9999.9 kcal

Body weight range

30 to 150 kg

(65 lbs to 340 lbs)*

Operating temp

-10 to 40 °C (14 to 104 °F)

Storage temp

-20 to 60 °C (-4 to 140 °F)

Batteries

2 x LR43 1.5V

Battery life

1 year

Product size

64 x 30 x 40 mm

(L x W x H)

(2.52 x 1.18 x 1.58 inches)

Weight

29.4 g (1.04 ounces)

NOTE

*Imperial units of measure are used on US models

only and metric units of measure are used on EU / UK
models only.

ABOUT OREGON SCIENTIFIC

Visit our website (ZZZRUHJRQVFLHQWL¿FFRP) to learn more
DERXW 2UHJRQ 6FLHQWL¿F SURGXFWV VXFK DV GLJLWDO FDPHUDV
MP3 players; children’s electronic learning products and
JDPHV SURMHFWLRQ FORFNV KHDOWK DQG ¿WQHVV JHDU ZHDWKHU
stations; and digital and conference phones. The website
also includes contact information for our Customer Care
department in case you need to reach us, as well as
frequently asked questions and customer downloads.

:H KRSH \RX ZLOO ¿QG DOO WKH LQIRUPDWLRQ \RX QHHG RQ RXU
website, however if you’re in the US and would like to contact
WKH 2UHJRQ 6FLHQWL¿F &XVWRPHU &DUH GHSDUWPHQW GLUHFWO\
please visit:

ZZZRUHJRQVFLHQWL¿FFRPVHUYLFHGHIDXOWDVS

OR

Call 1-800-853-8883.

For international inquiries, please visit:

ZZZRUHJRQVFLHQWL¿FFRPDERXWLQWHUQDWLRQDODVS

EU - DECLARATION OF CONFORMITY

Hereby, 2UHJRQ 6FLHQWL¿F, declares that this Pedometer
with Calorie Counter (model PE326CA) is in compliance with
EMC directive 89/336/CE. A copy of the signed and dated
Declaration of Conformity is available on request via our
2UHJRQ 6FLHQWL¿F &XVWRPHU 6HUYLFH

Pedometer with Calorie Counter

Model: PE326CA

USER MANUAL

EN

INTRODUCTION

7KDQN \RX IRU VHOHFWLQJ DQ 2UHJRQ 6FLHQWL¿FŒ SHGRPHWHU
(PE326CA).

Keep this manual handy as you use your new product. It
contains practical step-by-step instructions as well as
WHFKQLFDO VSHFL¿FDWLRQV DQG ZDUQLQJV \RX VKRXOG NQRZ
about.

KEY FEATURES

FRONT VIEW

1. COVER RELEASE: Press to open protective cover

2. Battery compartment

INTERIOR

1. CALO: Calorie measurement and weight display mode

2. DIST: Total distance and stride length display mode

3.

: Turns backlight on

4. Motion Sensitivity Switch: Increases or decreases unit

sensitivity

5. RESET: Resets display mode values to zero

6. HR / +: Changes clock hour digits; increases personal

weight and stride length values

7. MIN / -: Changes clock minute digits; decreases personal

weight and stride length values

8. Belt clip

LCD

1. PM for 12 hour format

2. Stride in Cm or Inches*

3. Weight in Kg / Lbs*

4. Distance in Km or Mile*

5. Displays when calories are shown

NOTE

*Imperial units of measure are used on US models

only and metric units of measure are used on EU / UK
models only.

GETTING STARTED

INSULATION TAPE

Before using the device, pull out the insulation tape
underneath the battery cover.

NOTE

The unit will not work until the tape is pulled out.

BATTERIES

To change the batteries:

1. Gently press and pull the battery compartment door.

2. Insert 2 x LR43 size 1.5V batteries or equivalent.

3. Replace the battery compartment door.

NOTE

Protect the environment by taking exhausted

batteries to authorized disposal stations.

To open the cover:

Holding the pedometer upright, grasp the clip with one hand
and press the COVER RELEASE button with the other.

CLOCK

Insert a thin blunt object into HR / + or MIN / - to alter the
clock time.

NOTE

The unit automatically returns to clock display after

5 seconds.

ADJUSTING THE SETTINGS

DISTANCE

Total distance = steps taken x average step length. For
greater accuracy, it is recommended that a personal stride-
length is set.

If unit shows more
steps than actual
number of steps taken,
slide switch toward “-”.

If unit shows fewer
steps than actual
number of steps taken,
slide switch toward “+” .