Oki 40834406 - Manual (Page 2)

3. Fan the paper.
4. Lift the paper bar (1) and load
paper (up to 500 sheets 20-lb. US
Bond). Keep the stack below the
full line (
2).
5. Lower the paper bar and push the
tray back into the printer.
Note: To install paper in Tray 1:
a. Open the Tray 2 front panel.
b. Slide Tray 1 out.
AUTOFEED
To set the printer to switch to Tray 2 when
Tray 1 is empty:
Printers with Operator Panel:
Set AUTOTRAY on in the Print Menu.
Printer with online Status Monitor:
Go to the Paper tab in the Status Monitor.
Select Auto Tray Switch.
Activate the Tray in
the Printer Driver
Windows
®
PCL Driver
1. Click Start → Settings → Printers
[ Printers and Faxes for XP].
The Printers (Printers and Faxes)
dialog box opens.
2. Right click the Oki printer icon,
then click Properties.
3. Click the Device Option(s) tab.
4. For Available Tray , select Lower
Cassette .
5. Click OK , then close the Printers
(Printers and Faxes) dialog box.
PostScript Emulation Driver,
(Printers with Postscript option
installed).
1. Click Start → Settings → Printers
[ Printers and Faxes for XP].
The Printers (Printers and Faxes)
dialog box opens.
2. Right click the Postscript
emulation printer icon, then click
Properties .
3. Next:
– Windows XP, 2000 and NT 4.0:
click the Device Settings tab.
– Windows Me and 98: click the
Device Options tab.
4. Then:
– Windows XP, 2000, NT 4.0 and
Me: under Installable Options ,
click Available Tray and select 2.
– Windows 98: under Change
setting for Available Tray , select
2 (1 Optional Tray) .
5. Click OK , then close the Printers
(Printers and Faxes) dialog box.
Macintosh
®
PostScript Emulation Driver,
(Printers with PostScript option
installed)
OS 8.x and 9.x
1. Activate Chooser from the Apple
menu.
2. Select LaserWriter 8 .
3. Click Printer → Setup .
4. Click Configure .
5. Change the Available Tray setting
to 2 (1 Optional Tray) .
6. Click OK twice.
7. Close Chooser .
OS X.1
No activation is required for
Macintosh OS X.1.
OS X.2
1. Activate Print Center from Local
Hard Drive → Applications →
Utilities → Print Center .
2. Highlight the printer name and
select from the menu Printers
→
Show Info .
3. Click the Available Tray
drop-down menu and select 2 (1
Optional Tray) .
4. Click Apply Changes and exit to
the desktop.