OTC Wireless 802.11 Wireless Serial Solutions WiSER2400.IP - Manual (Page 31)

WiSER 2400 Technical Manual Version 2.16 Copyright  2001-2005, OTC Wireless, Inc. All Rights Reserved Page 31 of 32
Limited Warranty
Recovering from the Data Only Mode
There are two approaches for recovering the WiSER2400 radio from the Data Only
Mode. First is to use the Administrative software under wireless connection since the
WiSER2400 radio will still take configuration command from the wireless port even when
it is running Data Only Mode. Use the alternative approach if the WiSER2400 can only
be linked through a serial connection. The instruction for the alternative approach is
given below.
1. Have the WiSER2400 radio connected to the COM port of the PC
2. Start the Administrative software running the serial connection mode
3. Power up or power cycle the WiSER2400 radio unit
4. Within 10 seconds after the WiSER2400 has powered up, use the
Connect button in the administrative software to establish a serial link
with the WiSER2400 radio
5. Once the link between the configuration program and the WiSER2400
radio is established, the user can start reconfiguring the WiSER2400
radio.
Technical Support
If problems are still not resolved, please contact our Technical Support to obtain further
assistance.
Current contact information will be on our Web site:
http://www.otcwireless.com
The seller warrants to the end user (“Customer”) that this product will be free from
defects in workmanship and materials, under normal use and service, for one (1) year
from the date of purchase from the seller or its authorized reseller. The seller’s sole
obligation under this express warranty shall be, at the seller’s option and expense, to
repair the defective product or part, deliver to Customer an equivalent product or part to
replace the defective item, or if neither of the two foregoing options is reasonably
available, The seller may, in its sole discretion, refund to the Customer the purchase
price paid for the defective product.
All returns must be authorized by OTC Wireless, Inc. and accompanied by a Return
Materials Authorization (RMA).
All products that are replaced will become the property of the seller. Replacement
products may be new or reconditioned.