3 wireless port – OTC Wireless 802.11 Wireless Serial Solutions WiSER2400.IP User Manual

Page 25

WiSER 2400 Technical Manual

Version 2.16

Page 25 of 32

3.4.3 Wireless Port

Wireless Settings

SSID:

The SSID of the access point the WiSER2400 is
to be associated with; or the peer-to-peer group
ID when the WiSER2400 is operated in the ad-
hoc mode. Maximum: 32 characters. A blank
entry is allowed. When left blank, the
WiSER2400 would interpret it as ‘ANY’ and will
try to join any available open wireless network.

Network Type:

Infrastructure mode:

for the WiSER2400 to be connected to an
access point.

Ad-Hoc mode:

for the WiSER2400 to join a peer-to-peer
wireless network.

Default value: Infrastructure.

Channel:

For setting the RF channel of the WiSER2400
when operated in the “Ad-Hoc” mode.

Supported value:

1 to 11 (US)

1 to 13 (International).

Advanced Wireless Settings

Transfer Rate:

For setting up the wireless data transmission
rate. Six choices available in the pull-down
menu.

Fragmentation Threshold:

For setting up the fragmentation threshold for the

wireless packet. Default value: 2436. Lower
value recommended for operation in a noisy RF
environment.

RTS Threshold:

For setting up the RTS threshold for the wireless
packet. Lower value recommended for operation
in a network with potential hidden-nodes
problems.

Fig. 16 WiSER2400 administration software

Configuration/Wireless Port panel

This manual is related to the following products:

802.11 Wireless Serial Solutions WiSER2400.Plus