Olivetti 145D - Manual (Page 30)

2 8
6. Press the keys
until the display shows:
VARIOUS SETT.
CONTRAST
7. Press the key:
The display shows:
CONTRAST
NORMAL
8. To view the other available options, "CONTRAST -
DARK" and "CONTRAST - LIGHT", press the keys:
9. To confirm your choice, press the key:
10. To return the fax machine to its initial stand-by mode,
press the key:
11. If you want to move back one function, press the key:
The contrast should be regulated on the basis of the
following criteria:
• NORMAL , if the document is neither very light nor very
dark . "NORMAL" appears on the bottom line of the display.
• LIGHT , if the document is dark . "LIGHT" appears on the
bottom line of the display.
• DARK , if the document is light . "DARK" appears on the bot-
tom line of the display.
T
O ADJUST THE RESOLUTION
The document must be present in the automatic
document feeder (ADF).
1. Press the key
until the desired resolution value appears on the dis-
play.
The resolution should be regulated on the basis of the
following criteria:
• STD (STANDARD), if the document contains easily legible
characters . An "arrow" appears on the bottom line of the
display in line with the " " symbol printed on the console.
• FINE , if the document contains very small characters or
drawings . An "arrow" appears on the bottom line of the dis-
play in line with the " " symbol printed on the console.
• HALF TONES , if the document contains shaded areas .
An "arrow" in line with the " " symbol and an "arrow" in line
with the " " symbol printed on the console appear on the
bottom line of the display.
T
O SEND A DOCUMENT
1. Insert the document in the automatic document feeder
(ADF).
The display shows on the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: "NOR-
MAL".
The initial resolution value is: " " (standard).
If you want, change the contrast and resolution values
as described previously.
2. To dial the number of the correspondent to whom you
wish to send the document, press the keys:
-
3. To start sending the document, press the key:
If the document is sent correctly, once this operation has
been completed, the display will show the message "TX
COMPLETED" for a moment.
n o t e
To delete an incorrect digit, move the cursor, using the
|
/
}
keys, to the right of the incorrect digit and press the key;
if you want to delete the whole number, hold down the
key for a few seconds.
n o t e
If you want, you can dial the correspondent’s number from
the phone book, see "
To program the phone book " and
" To send a document using the quickest method ".
n o t e
If you want to abort the transmission in progress , press
the key on the fax machine.The fax machine unloads
the document from the ADF and returns to its initial stand-by
mode.
If the document to be removed consists of more than one
sheet, before pressing to unload the first, remove all
the others by hand .
No transmission may however be aborted from the cord-
less phone.